Philips Nederland B.V.

Philips Danmark A/S

Philips GmbH Market DACH

Experience productivity in Full HD. This monitor is equipped with essentials for the workplace, such as LowBlue mode to protect the eyes, IPS LED wide view technology for high-quality imagery, and 1ms MPRT for sharp visuals.

Size of the display for this product, measured diagonally, usually in inches.

Display diagonal

The number of distinct pixels in each dimension that can be displayed. It is usually quoted as width × height, with the units in pixels: for example, "1024 × 768" means the width is 1024 pixels and the height is 768 pixels. The higher the number of pixels, the sharper the image.

Display resolution

Type of supported High Definition (e.g. Full HD, 4K Ultra HD).

HD type

The aspect ratio is the ratio of the width of an image to its height. The native aspect ratio is the one which the projector/display is particularly designed for. Images shown in native aspect ratio will utilize the entire resolution of the display and achieve maximum brightness. Images shown in other than native aspect ratio will always have less resolution and less brightness than images shown in native aspect ratio.

Native aspect ratio

The technology used in the display e.g. plasma, LED.

Display technology

The technology used to manufacture the panel, such as AMOLED or AH-IPS.

Panel type

A backlight is a form of illumination used in liquid crystal displays (LCDs). One type of backlight is made by LEDs, which can be either white or RGB (red green blue). White LEDs are used most often in notebooks and desktop screens, and in virtually all mobile LCD screens. RGB LEDs for backlighting are found in high-end color proofing displays such as HP DreamColor LP2480zx monitor or selected HP EliteBook notebooks, as well as newer consumer grade displays such as Dell's Studio series laptops which have an optional RGB LED display.

LED backlight

The technology used to illuminate the display panel, such as CCFL or various LED configurations (e.g., Edge LED, Full-Array).

Backlight type

A screen of a laptop, smartphone, etc., that responds to touch so you can control the interface using your fingers.

Touchscreen

Display brightness, measured by its Luminance, presented as a figure in nits. Typical brightness ratings for monitors range from 250 to 350 nits with a target value of between 80 to 120 nits being suitable for most displays in a normal viewing environment.

Display brightness (typical)

The response time is the time difference between the moment that a source (for example a video card) sends a signal and that equipment (for example a monitor) receives or display the signal. (Used abbreviations: R/F = Rise and Fall.)

Response time

The method used to measure the time it takes for a pixel to change colors, such as GTG (Gray to Gray) or BwB (Black-white-Black).

Response time measurement type

The time it takes for a pixel to change from one color to another, measured in ms.

Response time (MPRT)

Always gives an optimal view, even in direct sunlight.

Anti-glare screen

Describes the physical curvature of the display panel, such as whether it is flat or curved.

Screen shape

The difference in light intensity between the brightest white and the darkest black.

Contrast ratio (typical)

The proprietary brand name used by the manufacturer to describe the technology that automatically adjusts the backlight to improve the contrast ratio (e.g., ASUS Smart Contrast Ratio).

Dynamic contrast ratio marketing name

The highest number of times per second the image is updated, measured in hertz (Hz).

Maximum refresh rate

Maximum horizontal angle at which a display can be viewed with acceptable visual performance.

Viewing angle, horizontal

Maximum vertical angle at which a display can be viewed with acceptable visual performance.

Viewing angle, vertical

The total number of distinct colours that the device is capable of displaying (e.g. 1.07 billion colours).

Display number of colours

This is the parameter of a picture tube, which specifies the shortest distance between two dots of the same colour. The principle is: the smaller the dot pitch, the better sharpness of image.

Pixel pitch

The number of individual pixels displayed per inch of linear screen space, measured in pixels per inch (ppi).

Pixel density

The range of horizontal frequencies the device can process and display, measured in kHz.

Horizontal scan range

The range of vertical frequencies the device can process and display, measured in hertz (Hz).

Vertical scan range

The viewable size is often somewhat smaller than the actual size of a monitor, because there is a border around the image.

Viewable size, horizontal

The height of the screen area that can actually display an image, measured in millimetres or inches.

Viewable size, vertical

The range of horizontal scanning frequencies the device can support, measured in kHz.

Digital horizontal frequency

The range of refresh rates the device can support when operating in digital mode, measured in Hertz (Hz).

Digital vertical frequency

This is the size of the display screen, measured diagonally.

Display diagonal (metric)

Indicates whether the product supports the Display Data Channel Command Interface for controlling device settings via software.

DDC/CI

The percentage of transmitted light that is scattered by the material, indicating the level of cloudiness or translucency.

Haze rate

The resistance of the surface to scratches and abrasion, typically measured on the Mohs or pencil hardness scale (e.g., 9H).

Surface hardness

The specific color space standard the device is designed to reproduce, such as Adobe RGB or DCI-P3.

Colour gamut standard

Indicates whether the device supports the sRGB color space standard for consistent color reproduction.

Display sRGB

The diagonal length of the screen area, typically measured in inches (e.g. 24 inch).

Display panel size

Display

Indicates whether the device supports the VESA Adaptive-Sync standard to synchronize the refresh rate with the GPU to reduce screen tearing.

VESA Adaptive Sync support

The method used to synchronize the video signal, such as Sync-on-green (SOG) or Composite sync.

Component video sync

Indicates whether the device employs technology to reduce or eliminate screen flickering to decrease eye strain during prolonged use.

Flicker-free technology

Indicates whether the product features technology designed to reduce the amount of harmful short-wave blue light emitted by the screen to decrease eye strain.

Low Blue Light technology

Performance

The device contains speaker(s) to produce sound.

Built-in speaker(s)

Built-in camera

Multimedia

Under which category can the device be positioned in the market, e.g. camera phone.

Market positioning

The colour e.g. red, blue, green, black, white.

Product colour

Design

Whether or not the device features a USB hub to connect more than one other device via USB.

Built-in USB hub

Number of VGA (D-Sub) ports (connecting interfaces) in the device. The VGA (D-Sub) connector is a 15 pin connector between a computer and a monitor. It was first introduced in 1987 by IBM.

VGA (D-Sub) ports quantity

Digital Visual Interface (DVI) is a video display interface to connect a video source to a display device, such as a computer monitor.

DVI port

This is the amount of DVI-I interfaces. Digital Visual Interface (DVI) is a video display interface developed by the Digital Display Working Group (DDWG). The digital interface is used to connect a video source to a display device, such as a computer monitor. DVI-D means DVI digital, which means it can only support digital, but not analog.

DVI-D ports quantity

HDMI (High-Definition Multimedia Interface) is a compact audio/video interface for transferring uncompressed video data and compressed/uncompressed digital audio data from a HDMI-compliant device ("the source device") to a compatible computer monitor, video projector, digital television, or digital audio device. HDMI is a digital replacement for existing analog video standards.

HDMI

The number of sockets (ports) for HDMI connections. HDMI (High-Definition Multimedia Interface) is a compact audio/video interface for transferring uncompressed video data and compressed/uncompressed digital audio data from a HDMI-compliant device ("the source device") to a compatible computer monitor, video projector, digital television, or digital audio device. HDMI is a digital replacement for existing analog video standards.

HDMI ports quantity

The specific release version of the High-Definition Multimedia Interface standard supported by the device (e.g. 1.3 or 2.0).

HDMI version

The type of audio output that the device produces, and the connector(s).

Audio output

High-bandwidth Digital Content Protection (HDCP) is a form of digital copy protection to prevent copying of digital audio and video content as it travels across connections.

HDCP

The version of the High-bandwidth Digital Content Protection standard supported by the device to prevent the unauthorized copying of digital audio and video content (e.g. 2.2).

HDCP version

Ports & interfaces

Indicates whether the product supports the VESA mounting standard for attachment to compatible arms, brackets, or wall mounts.

VESA mounting

The product can be used wih VESA mounting interfaces.

Panel mounting interface

Cable management

Holes on the edge of devices through which a cable lock can be passed, so the device can be locked to a desk etc.

Cable lock slot

The standard of the security slot used to attach a physical locking cable to the device (e.g. Kensington or Noble).

Cable lock slot type

The part of the device that can be adjusted to change the height.

Height adjustment

The tilt, which means the angle at which the device is pointing (up or down), can be changed.

Tilt adjustment

The minimum and maximum angles at which the unit can be tilted, typically expressed in degrees.

Tilt angle range

Indicates whether the device can display a graphical menu or information directly on the screen for adjusting settings and viewing status.

On Screen Display (OSD)

The list of available languages for the device's display interface (e.g., AFR for Afrikaans, ARA for Arabic).

On Screen Display (OSD) languages

The total number of different languages available for the on-screen display menu (e.g. 15).

Number of OSD languages

Indicates whether this product supports is "plug and play". Plug and play is  hardware or software that, after being installed ("plugged in"), can immediately be used ("played with"), as opposed to hardware or software which requires configuration.

Plug and Play

The specific status lights available on the unit to provide visual feedback on its current state or connectivity (e.g., AC input, ACT, or Access).

LED indicators

Ergonomics

Amount of power consumed by this model, often expressed in watts (W). Typical values that manufacturers give are power consumption when off, standby/suspended mode, typical use, maximum usage.

Power consumption (typical)

The amount of electricity that is consumed when the product is on standby.

Power consumption (standby)

The amount of electrical energy consumed by the device when it is switched off, measured in watts.

Power consumption (off)

The voltage of the AC electricity that is inputted into the product.

AC input voltage

The range of alternating current frequencies the device can accept from the power source, measured in hertz (e.g., 45 - 65).

AC input frequency

The type of power supply which this product uses.

Power supply type

Power

The minimum and maximum temperatures at which the product can be safely operated.

Operating temperature (T-T)

The minimum and maximum temperatures at which the product can be safely stored.

Storage temperature (T-T)

The range of relative humidity, expressed as a percentage, within which the device can function correctly without damage or performance loss.

Operating relative humidity (H-H)

The maximum and minimum height above sea level at which the device can function correctly, measured in m.

Operating altitude

The maximum and minimum altitude at which the unit can be stored or transported without sustaining damage, measured in metres.

Non-operating altitude

Operational conditions

The total horizontal measurement of the product when the supporting stand is attached, measured in millimetres.

Width (with stand)

The measurement of the product from front to back when any supporting accessory or base is attached, expressed in millimetres or centimetres.

Depth (with stand)

The total vertical measurement of the product including its base or support structure, expressed in millimetres or centimetres.

Height (with stand)

The total mass of the unit including its supporting base, measured in kilograms or grams.

Weight (with stand)

The horizontal measurement of the device excluding the base or support structure, expressed in millimetres.

Width (without stand)

The measurement of the product from front to back without its base or support, typically expressed in millimetres or centimetres.

Depth (without stand)

The vertical measurement of the device when the stand is removed, measured in mm.

Height (without stand)

The mass of the device excluding the support base, measured in g.

Weight (without stand)

Weight & dimensions

The distance from one side of the packaging to the other.

Package width

The distance from the front to the back of the packaging.

Package depth

The distance from the top to the bottom of the packaging.

Package height

Package weight

Packaging data

Indicates whether a support stand is supplied with the product.

Stand included

Packaging content

Specifies the harmful or restricted substances that are not present in the product (e.g. Acetone, Alcohol, or Aluminium).

Doesn't contain

Sustainability

List of desktop operating systems tested as compatible with this product.

Compatible operating systems

The material or surface treatment applied to the outer casing of the unit (e.g. brushed steel, matt, or painted).

Philips 1000 series 27E1N1100D/27 computer monitor 68.6 cm (27") 1920 x 1080 pixels Full HD LCD Black