Philips Nederland B.V.

Philips Danmark A/S

Philips GmbH Market DACH

Get your best work done with the Philips 22" Full HD monitor. Crisp and vivid Full HD gives you the space and clarity to see your work. Features like height adjustment, Flicker-free and LowBlue mode make work easy on the eyes.

Size of the display for this product, measured diagonally, usually in inches.

Display diagonal

The number of distinct pixels in each dimension that can be displayed. It is usually quoted as width × height, with the units in pixels: for example, "1024 × 768" means the width is 1024 pixels and the height is 768 pixels. The higher the number of pixels, the sharper the image.

Display resolution

Type of supported High Definition (e.g. Full HD, 4K Ultra HD).

HD type

The aspect ratio is the ratio of the width of an image to its height. The native aspect ratio is the one which the projector/display is particularly designed for. Images shown in native aspect ratio will utilize the entire resolution of the display and achieve maximum brightness. Images shown in other than native aspect ratio will always have less resolution and less brightness than images shown in native aspect ratio.

Native aspect ratio

The technology used in the display e.g. plasma, LED.

Display technology

The technology used to manufacture the panel, such as AMOLED or AH-IPS.

Panel type

A backlight is a form of illumination used in liquid crystal displays (LCDs). One type of backlight is made by LEDs, which can be either white or RGB (red green blue). White LEDs are used most often in notebooks and desktop screens, and in virtually all mobile LCD screens. RGB LEDs for backlighting are found in high-end color proofing displays such as HP DreamColor LP2480zx monitor or selected HP EliteBook notebooks, as well as newer consumer grade displays such as Dell's Studio series laptops which have an optional RGB LED display.

LED backlight

The technology used to illuminate the display panel, such as CCFL or various LED configurations (e.g., Edge LED, Full-Array).

Backlight type

A screen of a laptop, smartphone, etc., that responds to touch so you can control the interface using your fingers.

Touchscreen

Display brightness, measured by its Luminance, presented as a figure in nits. Typical brightness ratings for monitors range from 250 to 350 nits with a target value of between 80 to 120 nits being suitable for most displays in a normal viewing environment.

Display brightness (typical)

The response time is the time difference between the moment that a source (for example a video card) sends a signal and that equipment (for example a monitor) receives or display the signal. (Used abbreviations: R/F = Rise and Fall.)

Response time

The finish of the screen's outer layer, which determines how light reflects off the surface (e.g. Glossy, Matte, or Anti-glare).

Display surface

Always gives an optimal view, even in direct sunlight.

Anti-glare screen

Describes the physical curvature of the display panel, such as whether it is flat or curved.

Screen shape

The graphic resolutions that can be displayed by the device. The graphic resolution describes the width and height dimensions of a display, such as a computer monitor, measured in pixels.

Supported graphics resolutions

The video modes that can be displayed by the device.

Supported video modes

The aspect ratio is the ratio of the width of a shape to its height. For example, 4:3 is common for standard displays and 16:9 is the ratio for Widescreen TV.

Aspect ratio

The difference in light intensity between the brightest white and the darkest black.

Contrast ratio (typical)

A property of a display system, defined as the ratio of the luminance of the brightest color (white) to that of the darkest color (black) that the system is capable of producing.

Contrast ratio (dynamic)

The proprietary brand name used by the manufacturer to describe the technology that automatically adjusts the backlight to improve the contrast ratio (e.g., ASUS Smart Contrast Ratio).

Dynamic contrast ratio marketing name

The highest number of times per second the image is updated, measured in hertz (Hz).

Maximum refresh rate

Maximum horizontal angle at which a display can be viewed with acceptable visual performance.

Viewing angle, horizontal

Maximum vertical angle at which a display can be viewed with acceptable visual performance.

Viewing angle, vertical

The total number of distinct colours that the device is capable of displaying (e.g. 1.07 billion colours).

Display number of colours

This is the parameter of a picture tube, which specifies the shortest distance between two dots of the same colour. The principle is: the smaller the dot pitch, the better sharpness of image.

Pixel pitch

The number of individual pixels displayed per inch of linear screen space, measured in pixels per inch (ppi).

Pixel density

The range of horizontal frequencies the device can process and display, measured in kHz.

Horizontal scan range

The range of vertical frequencies the device can process and display, measured in hertz (Hz).

Vertical scan range

The viewable size is often somewhat smaller than the actual size of a monitor, because there is a border around the image.

Viewable size, horizontal

The height of the screen area that can actually display an image, measured in millimetres or inches.

Viewable size, vertical

The range of horizontal scanning frequencies the device can support, measured in kHz.

Digital horizontal frequency

The range of refresh rates the device can support when operating in digital mode, measured in Hertz (Hz).

Digital vertical frequency

This is the size of the display screen, measured diagonally.

Display diagonal (metric)

Indicates whether the product supports the Display Data Channel Command Interface for controlling device settings via software.

DDC/CI

The percentage of transmitted light that is scattered by the material, indicating the level of cloudiness or translucency.

Haze rate

The resistance of the surface to scratches and abrasion, typically measured on the Mohs or pencil hardness scale (e.g., 9H).

Surface hardness

The specific color space standard the device is designed to reproduce, such as Adobe RGB or DCI-P3.

Colour gamut standard

The range of colours that the display can accurately reproduce, typically expressed as a percentage of a standard colour space (e.g. sRGB or Adobe RGB).

Colour gamut

The percentage of the NTSC color gamut that the device is capable of reproducing.

NTSC coverage (typical)

The device can be used with 3D technology.

Indicates whether the device supports the sRGB color space standard for consistent color reproduction.

Display sRGB

The diagonal length of the screen area, typically measured in inches (e.g. 24 inch).

Display panel size

Display

Indicates whether the product supports NVIDIA G-SYNC technology to synchronize the display refresh rate with the GPU to eliminate screen tearing.

NVIDIA G-SYNC

The product includes AMD Freesync Technology for the dynamic synchronization of the graphic card and the monitor in order to avoid screen tearing.

AMD FreeSync

Indicates whether the device supports the VESA Adaptive-Sync standard to synchronize the refresh rate with the GPU to reduce screen tearing.

VESA Adaptive Sync support

The method used to synchronize the video signal, such as Sync-on-green (SOG) or Composite sync.

Component video sync

Indicates whether the device employs technology to reduce or eliminate screen flickering to decrease eye strain during prolonged use.

Flicker-free technology

Indicates whether the product features technology designed to reduce the amount of harmful short-wave blue light emitted by the screen to decrease eye strain.

Low Blue Light technology

Performance

The quantity of speakers included in/with the product.

Number of speakers

RMS (Root mean square) is a measure of the continuous power required by a device, in particular audio amplifiers and loudspeakers.

RMS rated power

The device contains speaker(s) to produce sound.

Built-in speaker(s)

Built-in camera

Multimedia

Under which category can the device be positioned in the market, e.g. camera phone.

Market positioning

The colour e.g. red, blue, green, black, white.

Product colour

The colour of the frame surrounding the front of the display (e.g. Black, Silver).

Front bezel colour

Indicates whether the support base can be removed from the main unit.

Detachable stand

The colour of the feet, which are the projecting part on which a device/piece of furniture, or each of its legs, stands.

Feet colour

Design

Whether or not the device features a USB hub to connect more than one other device via USB.

Built-in USB hub

The technical standard of the USB hub, if available, which determines the maximum data transfer speed (e.g., 3.2 Gen 1).

USB hub version

The number of USB Type-A ports available for connecting peripheral devices to the unit.

USB Type-A downstream ports quantity

Number of VGA (D-Sub) ports (connecting interfaces) in the device. The VGA (D-Sub) connector is a 15 pin connector between a computer and a monitor. It was first introduced in 1987 by IBM.

VGA (D-Sub) ports quantity

Digital Visual Interface (DVI) is a video display interface to connect a video source to a display device, such as a computer monitor.

DVI port

This is the amount of DVI-I interfaces. Digital Visual Interface (DVI) is a video display interface developed by the Digital Display Working Group (DDWG). The digital interface is used to connect a video source to a display device, such as a computer monitor. DVI-D means DVI digital, which means it can only support digital, but not analog.

DVI-D ports quantity

HDMI (High-Definition Multimedia Interface) is a compact audio/video interface for transferring uncompressed video data and compressed/uncompressed digital audio data from a HDMI-compliant device ("the source device") to a compatible computer monitor, video projector, digital television, or digital audio device. HDMI is a digital replacement for existing analog video standards.

HDMI

The number of sockets (ports) for HDMI connections. HDMI (High-Definition Multimedia Interface) is a compact audio/video interface for transferring uncompressed video data and compressed/uncompressed digital audio data from a HDMI-compliant device ("the source device") to a compatible computer monitor, video projector, digital television, or digital audio device. HDMI is a digital replacement for existing analog video standards.

HDMI ports quantity

The specific release version of the High-Definition Multimedia Interface standard supported by the device (e.g. 1.3 or 2.0).

HDMI version

Number of DisplayPorts. A DisplayPort is a digital display interface developed by the Video Electronics Standards Association (VESA). The interface is primarily used to connect a video source to a display device such as a computer monitor, though it can also be used to carry audio, USB, and other forms of data.

DisplayPorts quantity

The specific release version of the DisplayPort standard supported by the device (e.g., 1.2 or 1.4).

DisplayPort version

The type of audio input that the device requires, and the connection needed.

Audio input

The socket for connecting headphones to the device.

Headphone out

Number of sockets /ports where headphones are connected.

Headphone outputs

How headphones connect to a device e.g. wirelessly or via a cable and connector.

Headphone connectivity

The socket (port) for the PC audio input.

PC Audio in

High-bandwidth Digital Content Protection (HDCP) is a form of digital copy protection to prevent copying of digital audio and video content as it travels across connections.

HDCP

Indicates whether the device can be powered directly via an alternating current (AC) power source.

AC (power) in

Ports & interfaces

Indicates whether the product supports the VESA mounting standard for attachment to compatible arms, brackets, or wall mounts.

VESA mounting

The product can be used wih VESA mounting interfaces.

Panel mounting interface

Holes on the edge of devices through which a cable lock can be passed, so the device can be locked to a desk etc.

Cable lock slot

The standard of the security slot used to attach a physical locking cable to the device (e.g. Kensington or Noble).

Cable lock slot type

The part of the device that can be adjusted to change the height.

Height adjustment

The maximum distance the unit can be raised vertically from its lowest position, measured in millimetres.

Adjustable height (max)

Indicates whether the device can be rotated 90 degrees to switch between landscape and portrait orientation.

Pivot

The range of motion available for rotating the unit around its vertical axis, typically measured in degrees.

Pivot angle

Indicates whether the product has a mechanism that allows it to rotate horizontally.

Swivelling

Swivel angle range

The tilt, which means the angle at which the device is pointing (up or down), can be changed.

Tilt adjustment

The minimum and maximum angles at which the unit can be tilted, typically expressed in degrees.

Tilt angle range

Indicates whether the device can display a graphical menu or information directly on the screen for adjusting settings and viewing status.

On Screen Display (OSD)

The list of available languages for the device's display interface (e.g., AFR for Afrikaans, ARA for Arabic).

On Screen Display (OSD) languages

The total number of different languages available for the on-screen display menu (e.g. 15).

Number of OSD languages

Indicates whether this product supports is "plug and play". Plug and play is  hardware or software that, after being installed ("plugged in"), can immediately be used ("played with"), as opposed to hardware or software which requires configuration.

Plug and Play

The specific status lights available on the unit to provide visual feedback on its current state or connectivity (e.g., AC input, ACT, or Access).

LED indicators

Ergonomics

The energy efficiency rating of the device when operating in Standard Dynamic Range (SDR) mode, categorized from A to G.

Energy efficiency class (SDR)

The energy efficiency rating of the device when High Dynamic Range (HDR) mode is active, ranging from A to G.

Energy efficiency class (HDR)

The amount of electric energy consumed by the device during standard dynamic range (SDR) operation over a period of 1000 hours, measured in kilowatt-hours (kWh).

Energy consumption (SDR) per 1000 hours

Amount of power consumed by this model, often expressed in watts (W). Typical values that manufacturers give are power consumption when off, standby/suspended mode, typical use, maximum usage.

Power consumption (typical)

The amount of electricity that is consumed when the product is on standby.

Philips B Line LCD monitor 221B8LJEB/00