TP-Link Deutschland GmbH

TP-Link Enterprises Netherlands B.V.

Multiple Application Scenarios Wi-Fi Coverage Works with Access Points Surveillance Works with IP Cameras Conference Call Works with IP Phones Wired Connections Works with Non-PoE Devices such as PCs and Printers

A network switch is a computer networking device that links networking segments. A switch has different layers, such as layer 2 (a network bridge, operating at the data link layer, interconnecting a small number of devices) and layer 4 (can act as a firewall, amongst other things).

Switch layer

Management features

The number of basic switching RJ-45 Ethernet ports (sockets).

Basic switching RJ-45 Ethernet ports quantity

The type/category of basic switching RJ-45 Ethernet ports (sockets).

Basic switching RJ-45 Ethernet ports type

The number of RJ45 copper ports supporting data transfer speeds of up to 1 Gbps (e.g. 24).

Gigabit Ethernet (copper) ports quantity

An SFP ("small form-factor pluggable transceiver") is a transmitter/receiver which interfaces a network device motherboard (e.g. in a switch, router) to a fibre optic or copper network cable. The "SFP ports quantity" is the number of ports for SFP connections in a device.

Installed SFP modules quantity

Ports & interfaces

Indicates whether the network switch can copy traffic from one or more ports to another port for monitoring and analysis purposes.

Port mirroring

The maximum number of routing table entries that the device can store and manage simultaneously.

Routing entries

Indicates whether the device supports combining multiple network connections into a single logical link to increase throughput and provide redundancy.

Link aggregation

Indicates whether the device can control the maximum amount of network traffic allowed to pass through a specific port or interface to prevent congestion.

Rate limiting

Indicates whether the device supports a network protocol that prevents loops in a bridge network topology.

Spanning tree protocol

Indicates whether the device can automatically detect when a network link is established on a port.

Active link detection

A Virtual Local Area Network (VLAN) consists of a group of computers and switches that can be physically distributed over different networks and buildings, but form one LAN on a logical level.

VLAN support

Network

The data transfer capacity of the switch per second.

Switching capacity

The MAC address is the 'Media Access Control Address'. It is a unique address given to a network interface controller (NIC) in a device. A MAC address table shows the addresses in a table format.

MAC address table

Indicates whether the device supports Ethernet frames with a payload larger than the standard 1500 bytes to increase data transfer efficiency.

Jumbo frames support

Indicates the support for Ethernet frames larger than the standard 1500 bytes to increase data transfer efficiency (e.g. 9000 bytes).

Jumbo frames

The amount of memory available in the network switch to temporarily store data packets during congestion, typically measured in megabytes (MB) or kilobytes (KB).

Packet buffer memory

Data transmission

Specifies the supported Dynamic Host Configuration Protocol (DHCP) options for network configuration, such as DHCP Option 66 for boot server addresses.

DHCP features

Indicates whether the device can optimize multicast traffic by ensuring it is only forwarded to the ports that have requested it.

IGMP snooping

Indicates whether the device has a mechanism to detect and prevent network loops to avoid broadcast storms.

Loop protection

Security

The type of mounting that can position devices in a shelving system (rack).

Rack mounting

Devices can be placed on top of each other.

Stackable

Design

What is providing power for the product e.g. mains electricity.

Power source

There is a power supply with this product.

Power supply included

The total quantity of power supply modules integrated into or provided with the device.

Number of power supply units

The range or specific value of direct current voltage required for the device to operate, measured in volts (e.g., 12 or 10 - 58).

DC input voltage

The amount of electrical current drawn by the device during operation, typically measured in amperes (A) or milliamperes (mA).

Input current

The maximum amount of power used by the device.

Power consumption (max)

Power

The device supports Power over Ethernet (PoE), which is one of several standardized or ad-hoc systems which pass electrical power along with data on Ethernet cabling. This allows a single cable to provide both data connection and electrical power to devices such as wireless access points or IP cameras.

Power over Ethernet (PoE)

The number of network ports on the switch that can provide power to connected devices using the PoE+ standard.

Power over Ethernet plus (PoE+) ports quantity

The maximum amount of electrical power the network switch can deliver to a connected device per port, measured in Watts.

Power over Ethernet (PoE) power per port

The maximum total amount of power available to be distributed across all PoE-enabled ports, measured in Watts (e.g. 120W).

Total Power over Ethernet (PoE) budget

The measurement or extent of something from side to side.

Width

The distance from the front to the back of something.

Depth

The measurement of the product from head to foot or from base to top.

Height

Weight & dimensions

SG2206MP

TP-Link Omada SG2206MP network switch L2 Gigabit Ethernet (10/100/1000) Power over Ethernet (PoE)

The product was deleted from Icecat database.

The link you are trying to access does not exist in the Icecat Catalog.

The product __mpn__ has brand restrictions.

The official description of %%title%% as supplied by the manufacturer. For easy access to this data, refer to the "ProductDescription" block and the "LongDesc" tag in XML or the "Description" block and the "LongDesc" tag in JSON.
