Schneider Electric SE

Schneider Electric GmbH

This APC Back-UPS offers power and surge protection for wireless networks, computers, gaming consoles and other electronics in your home or business. The 1200VA tower UPS has 6 total outlets, 4 of which are battery back up and surge protection, and 2 that are surge protection only. It has a surge energy rating of 273 Joules. It features Automatic Voltage Regulation to correct voltage dips and surges to proper levels. This UPS has a 2-year warranty and CE product certification.

Back-UPS, 1200VA, Tower, 230V, 6x IEC C13 outlets, AVR

The two main UPS topologies are Double-Conversion True Online and Standby / Eco. Many quality-based considerations are involved when choosing the the optimal UPS for the job, like how they are coping with voltage disturbances.

UPS topology

The maximum power that the device can produce.

Output power capacity

Output power

Waveform

The minumum voltage needed by the device during operation.

Input operation voltage (min)

The  maximum input voltage supported by the device.

Input operation voltage (max)

The frequency (Hz) which is required to power the product.

Input frequency

The minumum voltage produced by the device during operation.

Output operation voltage (min)

The maximum output voltage produced by the device.

Output operation voltage (max)

Output frequency

Output frequency regulation

Output voltage regulation

Automatic Voltage Regulation (AVR)

A surge protector is an appliance designed to protect electrical devices from voltage spikes. A surge protector attempts to limit the voltage supplied to an electric device by either blocking or by shorting to ground any unwanted voltages above a safe threshold. The surge energy rating is a measure of how much energy a surge protector can theoretically absorb in a single event, without failure.

Surge energy rating

The response time is the time difference between the moment that a source (for example a video card) sends a signal and that equipment (for example a monitor) receives or display the signal. (Used abbreviations: R/F = Rise and Fall.)

Response time

Input power factor

The amplitude level of the undesired background noise, usually measured in decibels (db).

Noise level

Alarms that make a sound when they are activated (set off).

Audible alarm(s)

Audible alarm modes

Features

AC outlet types

A power plug is a 2 or 3 pinned device that is placed into an electrical socket in order to make an electrical connection.

Power plug

The number of sockets in the device where AC electrical power can be connected.

AC outlets quantity

The device features a socket into which a USB cable can be plugged.

USB port

Number of USB 2.0 ports (connecting interfaces) in the device. USB 2.0 was released in April 2000 (now called "Hi-Speed"), adding higher maximum signaling rate of 480 Mbit/s (effective throughput up to 35 MB/s or 280 Mbit/s), USB 2.0 ports are usually black.

USB 2.0 ports quantity

USB port type

Number of Ethernet LAN (RJ-45) ports (connecting interfaces) in the device.  Ethernet LAN (RJ-45) ports allow a computer to connect to the ethernet.

Ethernet LAN (RJ-45) ports

SmartSlot

SmartConnect port

Ports & interfaces

The type of battery in the device, e.g. nickel–cadmium (NiCd).

Battery technology

The amount of time that a backup energy source (e.g. UPS - Uninterruptible Power Source) can power the device for, when the backup energy source is fully loaded (100% of capacity).

Typical backup time at full load

The amount of time that a backup energy source (e.g. UPS - Uninterruptible Power Source) can power the device for, when the backup energy source is half-loaded (50% of capacity).

Typical backup time at half load

Battery life (max)

Approximate time required to recharge the battery from completely empty to completely full

Battery recharge time

Battery

Form factor

Cable length

The colour e.g. red, blue, green, black, white.

Product colour

LED indicators

The IP code classifies and rates the degree of protection provided against the intrusion (including body parts such as hands and fingers), dust, accidental contact, and water by mechanical casings and electrical enclosures. It is published by the International Electrotechnical Commission (IEC). The digits (characteristic numerals) indicate conformity with the conditions summarized in the tables below. Where there is no protection rating with regard to one of the criteria, the digit is replaced with the letter X. an electrical socket rated IP22 is protected against insertion of fingers and will not be damaged or become unsafe during a specified test in which it is exposed to vertically or nearly vertically dripping water. Another example is the Sony Xperia Z Ultra, one of the first cellular phones to be IP-rated; it is rated at IP58 and marketed as "dust resistant" and can be "immersed in 1.5 meter of freshwater for up to 30 minutes".

International Protection (IP) code

Design

The minimum and maximum temperatures at which the product can be safely operated.

Operating temperature (T-T)

The minimum and maximum temperatures at which the product can be safely stored.

Storage temperature (T-T)

Operating relative humidity (H-H)

Operating altitude

Operational conditions

Compliance certificates

Certification

Certificates

Cables included

Management card included

Manual

Packaging content

The measurement or extent of something from side to side.

Width

The distance from the front to the back of something.

Depth

The measurement of the product from head to foot or from base to top.

Height

Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.

Weight

Weight & dimensions

The distance from one side of the packaging to the other.

Package width

The distance from the front to the back of the packaging.

Package depth

The distance from the top to the bottom of the packaging.

Package height

Package weight

Packaging data

Harmonized System (HS) code

Logistics data

RoHS stands for Restriction of Hazardous Substances. RoHS, also known as Directive 2002/95/EC, originated in the European Union and restricts the use of specific hazardous materials found in electrical and electronic products (known as EEE). All applicable products in the EU market after July 1, 2006 must pass RoHS compliance. The substances banned under RoHS are lead (Pb), mercury (Hg), cadmium (Cd), hexavalent chromium (CrVI), polybrominated biphenyls (PBB), polybrominated diphenyl ethers (PBDE), and four different phthalates (DEHP, BBP, BBP, DIBP).

APC Back-UPS, 1200VA, Tower, 230V, 6x IEC C13 outlets, AVR

The product was deleted from Icecat database.

The link you are trying to access does not exist in the Icecat Catalog.

The product __mpn__ has brand restrictions.

The official description of %%title%% as supplied by the manufacturer. For easy access to this data, refer to the "ProductDescription" block and the "LongDesc" tag in XML or the "Description" block and the "LongDesc" tag in JSON.
