LINDY International Ltd.

LINDY-Elektronik GmbH

This Lindy Media Converter extends the connection between two network devices at distances up to 550m using multimode fibre optic cables. The installation is plug-and-play and the user only has to connect to the RJ45 port with a Cat.5e or above Ethernet cable and the fibre port with a SC Multimode 50/125 or 62.5/125 Duplex fibre optic cable. No configuration needed, easily integrated into any existing Ethernet network  and supports Full/Half duplex mode and auto-negotiation on both ports.<br><br>The Media Converter can operate with 100 or 1000Mbps network speed, it also provides status LEDs to indicate data link, speed, Full/Half Duplex and link failure. Supports IEEE 802.3 standard and Jumbo frames up to 9K.

Media Converter SC 10/100/1000 Base-T to 1000 Base-FX, Multimode

The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.

Networking standards

The different speed levels of the Ethernet LAN connection.

Ethernet LAN data rates

A duplex communication system is a point-to-point system composed of two connected parties or devices that can communicate with one another in both directions, simultaneously.

Duplex system

Network

The greatest distance over which the data/signal can be transferred.

Maximum transfer distance

The distance over which a wave repeats itself. The wavelength determines the characteristics of the wave e.g. red light has a different wavelength to blue light.

Wavelength

Specifies the type of light propagation path within the core, such as Single-mode for long distances or Multi-mode for shorter reaches.

Fiber mode structure

Specifies the diameter of the fiber core and the outer cladding, typically measured in micrometres (e.g., 9/125 µm).

Fiber cable diameters supported (core/cladding)

Performance

Internal

The specific status lights available on the unit to provide visual feedback on its current state or connectivity (e.g., AC input, ACT, or Access).

LED indicators

The colour e.g. red, blue, green, black, white.

Product colour

Features

The technology that enables connectivity of the device, e.g. wired or wireless.

Connectivity technology

Number of Ethernet LAN (RJ-45) ports (connecting interfaces) in the device.  Ethernet LAN (RJ-45) ports allow a computer to connect to the ethernet.

Ethernet LAN (RJ-45) ports

The number of sockets (ports) for fibers (cables).

Fiber ports quantity

This terminates the end of an optical fiber, and enables quicker connection and disconnection than splicing. The connectors mechanically couple and align the cores of fibers so light can pass. Better connectors lose very little light due to reflection or misalignment of the fibers. In all there have been about 100 types of optic fiber connectors produced.

Fiber optic connector

Ports & interfaces

The electrical potential difference delivered by the device, typically expressed in volts (e.g. 24-48).

Output voltage

The maximum electrical current that the device can provide to a connected load, measured in amperes (A).

Output current

Power

The measurement or extent of something from side to side.

Width

The distance from the front to the back of something.

Depth

The measurement of the product from head to foot or from base to top.

Height

Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.

Weight

Weight & dimensions

The minimum and maximum temperatures at which the product can be safely operated.

Operating temperature (T-T)

The minimum and maximum temperatures at which the product can be safely stored.

Storage temperature (T-T)

The range of relative humidity, expressed as a percentage, within which the device can function correctly without damage or performance loss.

Operating relative humidity (H-H)

Operational conditions

The distance from one side of the packaging to the other.

Package width

The distance from the front to the back of the packaging.

Package depth

The distance from the top to the bottom of the packaging.

Package height

Package weight

Packaging data

Specifies the official standards, safety approvals, or regulatory certifications the product has received.

Certification

Certificates

25119

Lindy 25119 network media converter 850 nm Multi-mode Black

The product was deleted from Icecat database.

The link you are trying to access does not exist in the Icecat Catalog.

The product __mpn__ has brand restrictions.

The official description of %%title%% as supplied by the manufacturer. For easy access to this data, refer to the "ProductDescription" block and the "LongDesc" tag in XML or the "Description" block and the "LongDesc" tag in JSON.


English

Deutsch